Traffic LPR License Plate Recognition 9MP IP Camera for Highway Parking Lots

Model: LY-ITLR-900

1. Brief Introduction:

anpr-camera

LOYALTY-SECU LY-ITLR-900 Intelligent traffic LPR camera system with built-in 9 Mega pixel high definition global shutter CMOS sensor, ensure the high resolution, super low illumination, high frame rate, excellent color reducibility.

It equipped with the high performance lightning & surge protection devices, adopting the latest license plate recognition which based on the Deep learning algorithm, brings the higher accuracy of the objects behavior detection and feature recognition.

Our Intelligent traffic LPR cameras particularly suitable for city road, entrance/exit of the highway, toll station, large scale parking lot, traffic light junction etc.

2. Highlights of Traffic LPR Camera

Adopt 1 inch 9 Mega pixel high frame rate colorful global shutter HD CMOS, and max resolution 4296*2160P@120fps.

This camera with anti-dust, water-proof housing, built-in LED supplements light & lightning/surge protection device

Output image format: JEPG

Support flash light & LED strobe light work simultaneously. When using the flash light, the camera is capable of getting the clear image of driver and crew’s face.

Support the trigger methods, such as virtual loop, video, image etc.

Support the data recognition of vehicle’s license plate, type/color, vehicle’s mark/brand, pendant, safety belt, sun visor etc.

Support 11 color’s recognition(white,grey,yellow,pink,red,purple,green,blue,brown,black,cyan)

Vehicle recognition types: bus, medium bus, truck, van, car, SUV

Support work with vehicle detection processor,radar, supplement light

Support data upload via remote control, and the captured images can be uploaded to the terminal server, FTP server or other specified platform

3. Main Function of ANPR Software

Support more than 120 countries license plate recognition

Support Entry and Exit parameter settings

Support LED display screen information customization

Support Payment rules setting (support eight types’ payment rules)

Support Authorization setting

Support Operator and parking profile

Support Registration of vehicle number plate

Support Renewal/Recharge for the registered vehicle

Support Error correction of vehicle number

Support Surveillance pf software, view of vehicle image, payment information and support manual input vehicle number (Max 20 characters)

Support View of vehicle record and operator record

Support View of operator charge report, entry & exit vehicle report and parking fee report

4. The Workflow of ANPR Solution

Process description:

Entry: the license plate recognition camera captures an image by means of vehicle head detection or loop coil trigger or camera detector, and the image is transmitted to the software.

The software algorithm recognizes the image, writes the recognition result into the database and returns it to the camera, and the camera sends the switch signal to barrier switch.

Exit: the license plate recognition camera captures an image by means of vehicle head detection or loop coil trigger or camera detector, and the image is transmitted to the software.

The software algorithm recognizes the image, outputs the recognition result and compares it with the entrance recognition result in the database. The comparison is successful and the result is returned to the camera.

5. The Interface of ANPR Software

ANPR-Software-key-function

6. Support Multiple Languages

7. Support Global License Plate Recognition Ability over 120 Countries

LOYALTY-SECU ANPR algorithm supports recognizing the countries’ vehicle license plates below:

China, Hong Kong, Thailand, Taiwan, South Korea, Japan, Singapore, Malaysia, Vietnam, Saudi Arabia, Armenia, Georgia, Indonesia, Macau, Kazakhstan, Kyrgyzstan, Mongolia, Philippines, Tajikistan, Qatar, Sri Lanka, UAE, Turkey, Myanmar, Lebanon, Syria, Iraq, Laos, Azerbaijan, Cambodia, Cyprus, East Timor, India, Israel, Jordan, Palestine, Sri Lanka, Uzbekistan, Spain, Portugal, Latvia, Belarus, Bulgaria, Denmark, EU standards, France, Poland, Russia, Albania, Austria, Belgium, Bosnia and Herzegovina, Croatia, Czech Republic, Estonia, Finland, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Netherlands, Norway, Romania, Slovakia, Slovenia, Sweden, Switzerland, United Kingdom , Kosovo, Mexico, United States, Canada, Costa Rica, Cuba, El Salvador, Guatemala, Honduras, Puerto Rico, Brazil, Argentina, Bolivia, Chile, Colombia, Ecuador, Paraguay, Peru, Uruguay, Venezuela, Kenya, Mauritius, Sierra Leone, Tunisia, Uganda , Algeria, Botswana, Cameroon, Cape Verde, Ghana, Namibia, South Africa, Australia, New Caledonia.

6. Different Installation Environment

There is no turn of the lane, the recognition distance shall be 4-5 meters from the camera horizontal line, and the vertical angle should not exceed 30 degree, the horizontal angle not exceed 55 degree. When there is a turn, leave enough space for the vehicle to turn to ensure that the vehicle is straight before entering the recognition area.

If there is a distance of 4-5 meters before entering the slope, it is recommended that the entrance and exit be installed before entering the slope. Please be careful to avoid backlighting.

If there is not enough distance, the equipment can be disassembled to choose a suitable installation location. Confirming the camera’s recognition distance of 4-5 meters, and adjust the camera’s elevation or depression to ensure that the license plate is displayed horizontally in the lens. Generally, the angle of a straight slope does not exceed 15%, and the angle of a curved ramp does not exceed 12%. During construction, the installation angle of the camera can be adjusted according to the angle of the slope.

The position of the ground sensing coil and the vehicle detector in the slope can be constructed according to the texture of the slope. If the site conditions permit, the ground sensing coil should be constructed on a level ground as much as possible.

If the camera‘s position is somewhere above the slope, then two reduction gear should be installed at 6 and 7 meters from the camera’s horizontal line to ensure that the vehicle’s travel speed is less than 30km / h. At the exit, the installation principles are similar, but only one reduction gear is required at 6 meters.

9. Typical cases

typical-case-3
typical-case-4
typical-case-1

10. Application Scenarios

Border crossings, law enforcement;

Automobile repossessions;

Petrol station to log when a motorist drives away without paying the bill;

Entrance & Exit of the community, supermarket, public parking lot;

Traffic management systems, which determine traffic flow using the time it takes vehicles to pass two ANPR sites;

Analyses of travel behavior (route choice, origin-destination etc.) for transport planning purposes

To assist visitor management systems in recognizing guest vehicles;

Police and auxiliary police;

Car parking companies for car park management – payments and parking enforcement;

To raise or lower automatic barrier gate;

Validate vehicle types and payments at toll stations.

11. The Advantage of LOYALTY-SECU ANPR System

License plate recognition parking system is a reliable, accurate and cost effective car park management solution. It is widely used in many places, including supermarkets, retail parks, hotels, hospitals and leisure centers. Reduce labor cost and management difficulty of parking lot system, improve vehicle traffic efficiency.

Ticketless/ card less parking lot management, increase security and Parking access automation. Prevent car theft and prevent “ticket/card loss”

13. Specification

ItemSpecification
Camera modelLY-ITLR-900
Camera sensor1 Inch 9 Mega pixel global shutter CMOS
Camera lens25mm (MF2514M-10MP)or 30mm (SF3018M-10MP) is optional
Resolution4096(H)×2160(V)
Frame rate<=120fps
Interface protocolsONVIF(PROFILE S,PROFILE G), ISAPI, GB28181, SDK
Camera partsLED supplement light+ Anti-dust, water-proof housing+ Camera
Camera configurationExposure shutter, AGC control, AWC control etc.
Video compressionH.264/H.265/MJPEG
Output image formatJPEG
Interfaces3 pcs * RS-485, 1 pcs *RS-232, 2 pcs * RJ45 10M/100M/1000M
Trigger input4 Channels external trigger input, 1 channel SYNC signal light input
Trigger output6 Channels (Opt coupler isolation 2500VAC), work as supplement light syn output control
AI functionsObjects detection: vehicle capture rate ≥99%(virtual loop method), vehicle capture rate≥95%(video method),non-motorized vehicle capture pedestrians capture
Traffic violation detection: speeding, retrograde, truck forbidden, road line crossing
Vehicle recognition: license plate, vehicle types, vehicle color, vehicle brand or logo etc.
Camera capture lane3 lanes
Camera storageSupport TF card (≤64G)or cloud storage
Terminal server accessSupport to connect with the terminal server
Camera voltage100VAC~240VAC, Frequencies:48Hz~52Hz
Power consumption<20W
Work temperature-30℃~+60℃
Work humidity5%~95%@40℃
IP GradeIP65
Camera dimension180mm(W)×152.7mm(H)×636mm(D)
Net Weight5.2±0.5kg

SPECIALED IN PTZ VIDEO SURVEILLANCE SOLUTION
OVER 10 YEARS

R&D Oriented Surveillance Equipment Manufacturer

SPECIALED IN PTZ VIDEO SURVEILLANCE SOLUTION OVER 10 YEARS

R&D Oriented Surveillance Equipment Manufacturer

Loyalty-Secu is Ready to Serve You

Loyalty-Secu is Ready to Serve You

We will contact you within 1 working day, please pay attention to the email with the suffix “@loyalty-secu.com”.